A concrete driveway might be a solid and durable option but it has one major flaw. Due to its porous nature, it’s quite easy for one to stain and show those black tire marks.
These marks happen if you spin your wheels too fast while driving. They can also happen if you let your car sit on the concrete driveway for a long period of time.
Although it might be quite tricky, you can still manage to remove those pesky marks from the concrete. So without further ado, if you want to know how to remove tire marks from a concrete driveway, keep on reading this brief guide!
The Short Answer
The simplest way to clean a tire mark on concrete is by clearing the floor from any debris, then apply a suitable degreaser to scrub the tire marks off the driveway.
If this method doesn’t work, you should opt for a power washer to help you flush away the marks using water pressure.
Things to Keep in Mind Before Cleaning a Concrete Driveway
1. Clear Up the Driveway Before Starting
Before starting, make sure that you sweep off the driveway to remove as much dirt, debris, and fallen leaves as possible.
The empty and cleared-up driveway will show you any potential spots that also require cleaning along the way.
2. Don’t Use Harsh Chemicals or Bleach While Cleaning
Concrete is pretty durable against physical pressure but it breaks down easily under the power of harsh chemicals.
Some of these chemicals can ruin your concrete driveway permanently either by damaging or discoloring it.
This also applies to some household cleaners such as bleach. Besides discoloring the concrete floor, especially colored one, it can also damage all surrounding plants and soil it can reach.
3. The Longer It Sits, The Harders it Goes
Always make sure that you check your driveway for any skid marks and make sure that you clean them up in the earliest convenience
The sooner you deal with the marks, the easier it’s going to be, which saves you both the time and costs of cleaning tools and materials.
4. Test on a Small Scale
Concrete is made by mixing cement with a paste of sand and water. Since the cement is made by blending a wide variety of ingredients, the final composition of concrete can be altered slightly.
These simple changes in the recipe of the concrete may show drastic variations when combined with certain chemicals.
In other words, even if you use a concrete-specific degreaser or cleaner, it’s always recommended that you test it out on a small scale and see if it’s a good fit before you run into unfortunate surprises.
5. Avoid the Temptation of Using a Wire Brush
A metal wire brush is a wonderful solution to remove any stubborn stain. While it may help you remove the tire marks off the driveway, it’s extremely abrasive and will easily ruin your driveway by leaving permanent scrapes or scratches where you used it.
A Few Methods to Get Rid of Tire Marks on Concrete
Here are a few effective methods to get rid of the skid marks on concrete driveways. They’re arranged from the simplest to the most effective, although you can combine them together for maximum efficiency:
Method 1: Using Soapy Water and a Stiff Broom
Mix some mild dish soap with warm to hot water in a bucket, then splash some of the solutions on the tire marks.
Allow the mix to sit for 5 minutes to soften the brunts of rubber, then use a broom with stiff bristles or a deck brush to scrub the tire marks off. This should be enough for mild tire marks and recently created ones.
We recommend using Dawn Dishwashing liquid because it has a degreasing quality that works with slightly more stubborn tire marks.
Method 2: Using Commercial Concrete Degreaser
For tougher and relatively old tire marks, you might need to use a commercial concrete degreaser to remove the tire marks off your driveway.
There are plenty of good concrete degreasers out there, such as Simple Green and Drive Up. They’re both great for cleaning the concrete driveway and removing a variety of stains, including tire marks.
Pour some of the degreasers on the tire marks and allow it to sit for 15 to 30 minutes, but make sure that you don’t let it dry out by adding a few more when it’s drying up.
When the time comes, pour some water with a garden hose on the degreaser and scrub it with a deck brush, then rinse off the degreaser completely.
Method 3: Using a Power Washer
For the toughest tire mark stains, you might need some mechanical power added to the chemical power of concrete degreasers. The best solution here is to use a power washer, also known as a pressure washer.
Try to use the power wash on the lowest setting possible until you get the hang of it and avoid staying in on spot for long because it can damage your concrete.
You might also be interested in our blogs
How to Clean Brakes without Taking Wheels Off
With that said, you now know how to remove tire marks from a concrete driveway. As you can see, cleaning those tire marks may require some elbow grease and is a bit tricky.
Yet, it’s a manageable process that you can still do without needing to call for professional help. And remember, while cleaning a concrete driveway, the “Don’ts” are as essential as the “Do’s”, so make sure that you always keep them in mind.