How to Use a Manual Tire Changer

How to Use a Manual Tire Changer

Changing a tire isn’t a complicated process, but it can be frustrating. From bolts that won’t budge to a jack that won’t stay put, the process can present various complications, sometimes even dangerous ones.

Luckily, there’s a solution: a manual changer. 

If you want to learn how to use a manual tire changer, you’ve come to the right place. This guide shows you step by step how to perform the process. You’ll have a new set of wheels and a car running as good as new in no time. But at first you may ask “how long does it take to install new tires?” it depends how skilled you are but the average time is about an hour for all wheels.

The Short Answer

The process for how to use a manual tire changer is relatively simple: Loosen the worn-out tire from the rim using your pry bar, and secure the new one onto the rim of your car using the same tool.

how to make a homemade tire changer

What Is a Manual Tire Changer?

Manual tire changers are handy pieces of equipment that let drivers change a tire on its rim, using only the tool and their own hands. 

The rig comes with two components:

When to Change Your Tires

There are various reasons you may need a new set of tires, not all of them obvious. Look for these signs telling you when to change your tires:

  • An irreparable flat
  • Worn tread
  • Tires older than six years (check the wall for the manufacturer’s date)

Step-by-Step Guide: How to Use a Manual Tire Changer

Step One: Release the Air

use a manual tire changer

First, turn on the valve stem and let out all of the excess air.

Step Two: Position Onto the Changer

Next, place your tire on the triangular wedge positioned above one of the legs of the changer. Ensure you align the wedge up perfectly so that it meets where the rim hits the edge.

Step Three: Embed the Wedge

Embed the drop-down wedge into the vacant space between the rim and the tire. Next, use your pry bar and insert it into the slot on the side of your changer tool. Then, push the pry bar down and force the tire from the grasp of the rim.

Step Four: Rotate 180 Degrees

Rotate 180 degrees and repeat the previous two steps so that you can detach the rim on the other side. 

Step Five: Flip It

use a manual tire changer

Now you need to flip it over entirely and repeat steps two, three, and four.

Step Six: Place on Stem

Unscrew and loosen the top of the machine before placing your tire on the newly revealed stem. Next, you’ll need to position the spider lock washer valve onto the upper part of your tire and tighten the top of the machine back into its original place.

Step Seven: Separate from the Wheel Rim

The next step requires you to administer lubricant to the edges. Once you have, set the flat end of your pry bar directly into the space between the wheel rim and the tire. Then, rotate your pry bar around the circumference in a clockwise motion to remove the edge from its rim.

Step Eight: Remove From Rim

Next, lift your tire and use the flat end of the pry bar, inserting it in the space between the rim and the other side. Then, using the pry bar again, rotate it clockwise to remove the worn-out tire from the rim altogether.

Step Nine: Lubricate

Before you attach your new tire, apply lubricant around its edges to make the appliance easier. Once you’ve done this, set it onto the top of your rim.

Step Ten: Fit Onto the Rim

using manual tire changer

Inject the flat end of your pry bar into the vacant space between the rim and your new tire. Be sure to lift the pry bar to free the edge of it over the rim’s edge. Repeat around the entire circumference until it fits on the rim completely.

Step Eleven: Secure Onto the Rim

Push your tire down, ensuring the rim touches the other side. Next, put your pry bar’s hook end into the area between the rim and the remaining side. Rotate your pry bar clockwise all the way around until your new tire is on the rim fully and securely. 

Step Twelve: Remove the Manual Changer

Last but not least, remove the manual changer and hit the road.

Final Thoughts

This guide on how to use a manual tire changer has shown that it’s a relatively simple process. Once you do it a couple of times, you’ll be able to change your tires whenever you need.

Here is our guide about using a manual tire changer but if you still hesitate or are in a lack of time, feel free to look though the next article – How Much Does It Cost To Get Tires Changed.

Did you find our guide helpful? Then you can check out the following articles:

How To Remove A Stuck Tire
How To Get A Stripped Lug Nut Off A Tire
How To Tell If Your Tires Need Replacing
How Often Do You Need To Change Tires
How To Change An ATV Tire
How To Change A Truck Tire
How To Change A VW Jetta Tire
How Does NASCAR Change Tires So Fast
How To Change Tire On Travel Trailer
How To Reset Flat Tire Warning BMW 530i